1. CB and MFC wont record using ( AUTO )
2. When I use Digital Recorder - I have no video on CB ( sound Ok )
Can you explain settings required to capture CB ...? ( without using digital recorder )
Upgraded to Windows 10 Pro ( x64 ) yesterday.
I had Win7 x64 and version 5.0.1.36 and "Monitor" would capture
Livejasmin
myfreecams
charurbate
.. automatically and instantly.
( the monitor would actually sense a stream and wait for it to start )
And multiple streams could be actively waiting for streaming to start.
But now after upgrading windows 10 Pro ...
No 'sensing' of video on webpage ...
LJ captures instantly but only One stream at a time.
( any active streams have to complete first )
MFC only captures only in digital recorder now ( after waiting about 2 to 4 minutes to connect )
( same with CB - but no video captured )
Is Win10 responsible for these drastic changes ...
... or is the problem with Jaksta version 6?
I'm wondering if I should re-install W7 - I have so many programs not working properly now.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Answers: 30, Votes: 0
LiveJasmin capture not working at all now in AUTO
Used to simply mouse over a a performer and a stream would start.
And, actual chat room not captured now either.
W10 Pro x64.
Firefox 40.0.2
Flash 19.0.0.185
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
I would like to add that I had the current WinPcap 4.1.3 installed already on my W7 x64 that carried over to win10 pro.
After installation of Jaksta 6, it did not find WinPcap , so I tried to re-install.
The WinPcap installer said I had it was already installed.
And, when I re-ran the install it had 2 file access errors, that I had to "SKIP".
I'm now going to completely un-install WinPcap now.
Then, re-install.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Still not working.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
More issues with MFC
Just tested again.
1. Takes 11 seconds to "connect' using video recorder.
2. Collected 1 minute of capture, then manually stopped by me.
3. Jaksta freezes my computer while processing for a few seconds.
4. The recorded video only has 3 seconds.
5 Chaturbate recorded with digital recorder only has audio.
6. "Old format" webpage of live Jasmin using digital recorder uses "new format" video with flash sidebars
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Here is my Logfile from LJ.
AUTO does not work unless I logged in.
( something I forgot to try after reading other topics )
So you will see that the 'mouse over' streams dont capture and chat rooms dont capture until I logged in as member.
( JustCandy is a mouseover - MayaSinn is a open chat room after I logged in )
I cant remember the other mouseovers or chat rooms I opened as guest.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
This logfile is MFC as guest.
It took 1:20 to 'connect'.
I manually canceled at a duration of 1:02.
Jaksta was 'not responding' for over a minute as the secondary process was started making the AVI file. ( 258mb of memory used in 2nd process and 78 percent of possessor utilization on a 4 core 3200mhz AMD chip. )
The FLV file was smooth until around 20 seconds into the 56 second video.
The AVI was choppy and MPC-HC had a popup that occurs when files are not sequenced properly. ( AVI chunk viewer )
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Logfile from CB this time.
No AUTO captured ( same as other tests )
Only a couple seconds to 'connect' using Digital recorder.
1st stream stopped unexpectedly after 32 seconds ( when I closed my clock on desktop )
2nd stream manually stopped at a duration of 1:26.
Both FLV and AVI files have no video.
( audio ok )
No issues with 2nd process ( although no video was captured )
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
If these issues are occurring on your tests also, maybe I should ask for a refund ?
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
I really cant follow your postings - works, doesnt, then does again and then your trying to use the DVR recorder for a live stream which is not what it is intended for so dont use that. Its for premium tv/movie sites like those listed on the opening home page of the DVR browser.
Its best to post one issue and wait for a response.
Lets start from the beginning as these cam sites all capture fine in v6 on windows 10 just like they did in v5.
You said that your upgrade to Windows 10 stuffed your winpcap install. Is that now installed correctly and do you have the correct network interface selected in the settings?
Start with one site please - chaterbate as that is the topic of your thread - and provide debug logs when you try and capture a cam.
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Hi, thanks for your prompt reply.
In each of the logfile I listed above started in AUTO download mode.
None of the 3 sites initiated a capture in guest mode.
I waited about a minute in each case for the AUTO to start, but they did not capture anything.
In the previous topics I read here, it is mentioned that everything is logged. Ok, I will make a new logfile of just CB.
I will wait 5 minutes to AUTO to start a capture.
The 1st logfile will be as guest.
The 2nd logfile will be as member.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
I forgot my setting screenshots.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
WinPcap 4.1.3
screenshot
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Your logs show that there was already an rtmp connection when you switched on auto mode.
If your already watching a cam and want to record then you will need to reload the cam in your browser so that JMR picks up the start of the rtmp connection sequence. Holding the shift key down whilst clicking the reload button can also help to clear out any cached connection. This applies to v5 and v6.
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Thats not possible.
FireFox was closed and Jaksta was not running before I started Jaksta with Debug.
1. I have rebooted
2. Started Jaksta
3. flipped the debug buton
3. Opened FF
4. Opened bookmark CB.
5. Selected the 1st cam on page.
In BOTH logfiles posted
Ok, one more time.
Following the sequence I just listed.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
I think we need to think about a conflict.
I have ANT extension down loader for FF also.
And, I just disabled it.
( Firefox restarts )
But,, still no AUTO capture.
Just thinking where an existing steam would be.
Any other ideas?
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
I turned off AUTO, then dragged and dropped the URL.
Error cut and pasted below ....
Stream Downloading
Start: 9/24/2015 9:36 PM
Source: https://chaturbate.com/shaadia/
Destination: Chat with Shaadia in a Live Adult Video Chat Room Now
Stream Downloading Starting: Size: 0 bytes/0 bytes (0%), Time: 00:00:00/Live,
Stream Downloading Queued: Size: 0 bytes/0 bytes (0%), Time: 00:00:00/Live,
Page Downloader
Starting stream extraction process from https://chaturbate.com/shaadia/
Extracting Failed: Size: 0 bytes/0 bytes (0%), Time: 00:00:00/Live,
Url is not supported. Please try Auto detection or the Digital Video Recorder.
End: 9/24/2015 9:36 PM
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Here is the relevant part of the log file.
These are the first RTMP packets being processed which show the server sending you data. The client is the one that initiates the request, not the server so that is why I say you were already viewing a cam when you started monitoring.
2015-09-24 21:12:13,191 [11] INFO dj [(null)] - ProtocolMonitor: Closing ---> 192.168.1.100:49476:64.38.207.50:1935
2015-09-24 21:12:13,196 [11] INFO dj [(null)] - ProtocolMonitor: Closing ---> 192.168.1.100:49476:64.38.207.50:1935
2015-09-24 21:12:13,199 [11] INFO dj [(null)] - ProtocolMonitor: Closing ---> 192.168.1.100:49476:64.38.207.50:1935
2015-09-24 21:12:13,203 [11] INFO dj [(null)] - ProtocolMonitor: Processing <--- 192.168.1.100:49476:64.38.207.50:1935 Len=1460
2015-09-24 21:12:13,208 [11] INFO dj [(null)] - ProtocolMonitor: Closing ---> 192.168.1.100:49477:64.38.238.137:1935
2015-09-24 21:12:13,212 [11] INFO dj [(null)] - ProtocolManager RTMP: Starting protocol manager
As you have stated that you started monitoring before you even started the browser this may indicate that winpcap may not be reporting all network traffic for some reason. Given you had trouble with it during the upgrade perhaps its still corrupt.
Another user did report they had issues with winpcap 4.1.3 on windows 10 and uninstalling, rebooting and reinstalling fixed it. Have you tried that?
There is also a new monitor that is binary compatible with winpcap that some researches have done that implements it as a ndis6 driver - http://www.win10pcap.org/. Note this is not from the official winpcap site but has passed windows logo and is open source. Ive used it here without issue on some test machines. Whilst we will still continue to distribute the official one which is 4.1.3 you may wish to try this one out given your issues with your windows 10.
chaturbate is not supported with drag and drop as the message states.
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Another thing we could do to see if we can work out what is happening with winpcap on your machine:
1. Close your FF and JMR
2. Copy C:\Program Files (x86)\Jaksta Technologies\Jaksta Media Recorder 6\jmrp.exe.log4net to a temp folder and open it in notepad
3. Change the line <level value="ERROR" /> to <level value="DEBUG" />
4. Save and copy it back over the top of C:\Program Files (x86)\Jaksta Technologies\Jaksta Media Recorder 6\jmrp.exe.log4net
5. Start JMR and switch on auto
6. Start your browser and go to the site and view a cam
7. Close JMR
8. Go to C:\Users\<your username>\AppData\Local\Temp\Jaksta and zip me up all the logs and post them here.
9. Repeat steps 3 and 4 again to switch back to ERROR
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
No log files in the Temp folder.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
You must not be in the correct location.
Else how were you posting them here before ;)
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Just use the send option in the app (the paper plan icon) to get them for you in the zip file.
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
I'm getting angry/frustrated now.
Been at this ALL day.
Don't know what time it is there but it's 11:16pm now here.
I installed/ removed the Win10pcap 3 times.
The uninstaller does not work properly.
I think it still left files.
And, it produced an error on my WireShark program.
I downloaded the WinPcap from the developers website this time.
Same results.
Going to do your debug again now.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Ok, here's your " Level = "DEBUG" logfile.
I will read your reply tomorrow morning 9am CST
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
The logs wrapped unfortunately. Does look like winpcap is working ok though.
Please change these lines in the log4net file and get me them again. Also stop auto 10 seconds after the cam starts to play.
<param name="MaximumFileSize" value="5000KB" /> to <param name="MaximumFileSize" value="8000KB" />
<param name="MaxSizeRollBackups" value="5" /> to <param name="MaxSizeRollBackups" value="20" />
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Good morning :)
1. Modified your script.
2. I rebooted.
3. Opened Jaksta.
4. Flipped the AUTO on
4. Opened FF
5. Clicked the 1st cam on page
6. Waited 10 seconds
7. Flipped the AUTO off
8. Closed the cam ( back to main page )
9. Closed FF
10 Created the logfile with Airplane
Waiting for your analysis ...
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Your logs show winpcap giving an "Arithmetic operation resulted in an overflow." error which is resulting in dropped packets.
Given winpcap doesnt seem to be installing on your upgraded win10 machine - have your tried the Jaksta Network Monitor?
You can install this from the JMR install folder or the link on the JMR > settings > internet downloads tab.
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
I installed the Network Monitor.
CB is OK
MFC is OK.
LJ .. mouse overs no longer finish to completion when removing mouse. Otherwise, it seems OK.
YouTube - is not captured. DVR worked Ok. But, unable to re-capture with a change in quality. ( ANT plugin knows a change in quality )
Vimeo - is not captured. DVR worked, but audio is crackly (My ANT plugin has no audio problem )
So, maybe your going to tell me not to use the DVR again.
But, I thought I'd let you know whats does work for me.
Still testing here.
I'm not sure if I'm using this release properly.
The previous version was automatic with everything.
Let me know what you want to investigate next.
PS. My other programs using WinPcap are working fine. ( as far as I can tell )
Thanks so much for your time and patience with me.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
v5 and v6 work the same way with auto detect. The code is pretty much the same especially at that winpcap level.
At a higher level the difference with v6 is with streams that have multiple streams/qualities/formats you will get a prompt to select the stream/quality/format you want unless you have set a preferred selection for format and quality in the settings. But that is higher up than where that math error is being triggered from winpcap.
Its v.strange that you can now auto detect those cam sites but cant auto detect youtube using the JNM. You can drag and drop or cut and past a youtube url if you want btw without having to engage auto detect. Check that the stream selection dialog is not appearing behind the main window when trying to auto detect youtube. Use alt-tab or look in the task bar to see if more than one window is available. For youtube its actually easier to drag and drop than to auto detect especially if you want to download multiple ones from my experience and looking at the analytics that is how most people are now doing it - only about 40% now autodetect youtube.
On the DVR, it should be fine for youtube, but not the recommended capture method as downloading is always preferred. It is a DVR dont forget. So if the audio or video stutter there will be a stutter in the recorded file. Just like your cable or sat boxes DVR would do if it had a connection/interference issue. It also requires more resources when compared to normal downloading as there is another browser that needs to open in the background to allow the DVR. If your using your machine/network heavily whilst DVR'ing then it may have a stutter that you don't notice but behind the scenes the DVR has had a stutter. Does that make sense? I can explain more if you need me to.
If your up for it I can provide a version to you that will give us more details on what exactly in winpcap is causing that math error. Who knows it might be a strange combination between your win10, firewall, network card, isp etc etc that has highlighted a bug in our winpcap integration and therefore if we can fix it helps both you and others, or could help you sort out what is wrong with your install of it given the issues you had with your upgrade to win10 and subsequent winpcap installations.
I really appreciate your thanks but I am here to help. Getting to the bottom of these type issues is actually quite fun for me believe it or not. So thank you to you for sticking with me and not getting too angry and frustrated.
--- Import ---
Author: CRS
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Hi,
I been busy turning off / disabling / uninstalling all the nasty bloatware and spying with W10.
( with all profiles - PITA )
Sorry for my delay.
Yes, I changed my setting to prompt me on quality and format now.
But, AUTO did not capture.
However, Drag-n-Drop worked as you said, with a prompt for quality and formats available
Is your test version over the top? or is this a separate install?
( will it damage my authorization? )
Yes, I'm willing to try your test version.
You can send the link to me in my Email if you dont want to post the link here.
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0
Oh, I forgot to say ..
When drg-n-drop Vimeo -- the automatic converter ( to avi ) is producing the 'crakle' in the audio within the AVI.
Maybe it does not like the codec Vimeo uses in the mp4 it downloaded?
--- Import ---
Author: Dave
Created At: 2015-09-24T22:08:58+08:00
Updated At: 2015-09-28T04:34:22+08:00
Views: 1516
Votes: 1
--- Import ---
From Support Migration @ 08 May 2023 01:05
Votes: 0