Do you have a patch or settings suggestion my proxy settings kept changing to a 127.000.
--- Import ---
Author: a3124870418@gmail.com
Created At: 2019-08-12T04:32:20+08:00
Updated At: 2019-08-17T19:44:03+08:00
Views: 17
Votes: 0
--- Import ---
From Support Migration @ 08 May 2023 02:05
Answers: 7, Votes: 0
HTTPS monitoring sets the default proxy to go through JRM so streams over HTTPS can be detected when AUTO is switched on.
If you are having specific issues with this feature please tell me what is happening and provide debug logs.
You can also switch off HTTPS monitoring via the switch on Settings > Internet Downloads
--- Import ---
Author: CRS
Created At: 2019-08-12T04:32:20+08:00
Updated At: 2019-08-17T19:44:03+08:00
Views: 17
Votes: 0
--- Import ---
From Support Migration @ 08 May 2023 02:05
Votes: 0
Jmr is changing my proxy settings by first by activating the manual proxy setup, second by adding 127.0.0.01 in address and another set of numbers in port. Im looking for a patch or settings tweek i can use to stop this from happening.
--- Import ---
Author: a3124870418@gmail.com
Created At: 2019-08-12T04:32:20+08:00
Updated At: 2019-08-17T19:44:03+08:00
Views: 17
Votes: 0
--- Import ---
From Support Migration @ 08 May 2023 02:05
Votes: 0
That is correct - it is supposed to do that when you switch AUTO on, so HTTPS streams will be directed to JMR for capture.
If you don't want to capture HTTPS streams then switch of Monitor HTTPS/SSL on Settings > Internet Downloads. Alot of streams though are over HTTPS so you will miss alot of it you do.
What is the actual issue you are having with this?
--- Import ---
Author: CRS
Created At: 2019-08-12T04:32:20+08:00
Updated At: 2019-08-17T19:44:03+08:00
Views: 17
Votes: 0
--- Import ---
From Support Migration @ 08 May 2023 02:05
Votes: 0
When the proxy settings change it wither shows an error msg or the stream will freeze. Either way i have to go to my proxy settings and delete the 127.0.0.1 some time 20-30 times a night.
--- Import ---
Author: a3124870418@gmail.com
Created At: 2019-08-12T04:32:20+08:00
Updated At: 2019-08-17T19:44:03+08:00
Views: 17
Votes: 0
--- Import ---
From Support Migration @ 08 May 2023 02:05
Votes: 0
Can you provide debug logs as requested?
--- Import ---
Author: CRS
Created At: 2019-08-12T04:32:20+08:00
Updated At: 2019-08-17T19:44:03+08:00
Views: 17
Votes: 0
--- Import ---
From Support Migration @ 08 May 2023 02:05
Votes: 0
I went to reinstall jmr to send debuglog an actovation code said i tried to activate the software to many times
--- Import ---
Author: a3124870418@gmail.com
Created At: 2019-08-12T04:32:20+08:00
Updated At: 2019-08-17T19:44:03+08:00
Views: 17
Votes: 0
--- Import ---
From Support Migration @ 08 May 2023 02:05
Votes: 0
Fill this form out requesting the # of allowed activations to be increased.
https://support.jaksta.com/support/tickets/new
You don't need to reinstall JMR to switch on debug mode. Instructions are here:
--- Import ---
Author: CRS
Created At: 2019-08-12T04:32:20+08:00
Updated At: 2019-08-17T19:44:03+08:00
Views: 17
Votes: 0
--- Import ---
From Support Migration @ 08 May 2023 02:05
Votes: 0