Jaksta Media Recorder for Windows for Windows Technical Support Forum

Hi,

I’ve been using the “Stream Downloader” with the Auto option on for recording Livejasmin streams and it’s been working fine until a few days ago when some streams would say the model is offline when the Auto option was turned on, now it seems to be happening all the time.

Are Livejasmin now detecting Jaksta and preventing the stream from loading? I tried visiting from a different IP address and from another laptop using the trial version of Jaksta and I get the same issue.

Steps to reproduce the issue:

1: Load Jaksta Media Recorder 7 and visit https://www.livejasmin.com and click one of the models that are online to confirm the stream is working, then hit the back button.

2: Enable the Auto option on the Stream Downloader page and try clicking on the models stream again, this time it will say they are offline.

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

By the way Chrome gives the following errors when the Auto option is on so resulting in the streams not playing.

vendor.min-a67e2.js:27 WebSocket connection to 'wss://jaws.dditscdn.com/socket.io/?EIO=3&transport=websocket' failed: Error in connection establishment: net::ERR_PROXY_CONNECTION_FAILED

18vendor.min-a67e2.js:27 WebSocket connection to 'wss://jaws.dditscdn.com/socket.io/?EIO=3&transport=websocket' failed: Error in connection establishment: net::ERR_PROXY_CONNECTION_FAILED

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

Great, thank you for the update, I’m happy to test any beta versions if needed. I look forward to seeing the new version with the issue fixed.

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

In the mean time, you can open a performer's page with auto off, refresh the page and as it's loading, quickly turn auto on. If you catch it at the right moment, the stream loads and recording begins.

--- Import ---
Author: Andrew Nichols
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

Thank you for the tip, I’ve just tried with Chrome and Firefox and I’ve not had any success with that method, I tried turning on auto at various stages of the page load but couldn’t get Jaksta to start recording no matter how many times I tried.

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

I use Chrome as-well. Just turn auto on immediately after hitting the refresh button. If you're alt-tabbing to get to Jaksta, you're taking too long (use Jaksta's small interface if it's otherwise hidden behind your browser).

--- Import ---
Author: Andrew Nichols
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

No it doesn’t work for me unfortunately. I tried the small interface version and I had it placed above the refresh button for quick access.

If I hit the refresh button and then enable auto strait away, when the page finishes reloading it just says the model is offline. If I delay a little bit before hitting auto the stream loads but in both cases no stream is recorded by Jaksta.

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

OK, you're turning auto on too quickly then. I have Jaksta with the small interface in the bottom right of my screen.

--- Import ---
Author: Andrew Nichols
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

No unfortunately still no luck with this, I’ve tried doing it straight away and with varying delays and it doesn’t work for me.

Hopefully CRS will have a solution and new version of Jaksta out soon? any updates CRS?

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

Great, thank you for the hard work.

I look forward to testing out the beta version when you make it available, I’ll keep checking this thread for the link .

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

Hi,

I’ve just tried the beta version, and unfortunately I’m still having the same issue.

I tried using both the Winpcap and Network Monitor options in the Settings->Internet Downloads page .

I’ve attached the debug logs for you to look at. In the meantime I’ll go ahead and try some other sites.

If there are any settings I can change let me know.

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

Actually I’ve just tried it on another laptop and it is working on that one, so I’ll try comparing the setting and perhaps do a fresh install instead of the upgrade and see if that solves the issue.

And if you see anything from the logs files that would explain why it’s not working on the laptop I normally use let me know.

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

It works for me, plus Jaksta using .NET 4.5 no longer crashes when I'm using iTunes. It does however, crash occasionally when on Jasmin's website; first time was when a performer left the room, so to speak. I'll try to remember to create logs next time.

--- Import ---
Author: Andrew Nichols
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

On the laptop that I can get Jaksta running on, it crashed 4 times in the last hour when recording livejasmin streams.

I’ve attached the logs from Windows 7 ( Control Panel\All Control Panel Items\Administrative Tools -> Event Viewer) for you to look at for one of the crashes (each crash event looked the same). Each time it crashed it created an “Application Error” and a “.NET Runtime” error event.

In my case I was recording 3 or 4 livejasmin streams and I think the crash happed just after one of the streams finished but not 100% sure.

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---

Ok, I’ve attached the new logs as requested without “include network trace in log files” enabled.

I tried two models with auto turned on to show the issue and then at the end I tried one model with Auto off, hopefully, the logs will show the difference so you can track down the problem.

I tried installing the last beta as a fresh install the other day, but it didn’t make any difference, when installing JMR7-7.0.1.5 I used the update option.

On the other laptop JMR7-7.0.1.5 seems to be ok so far and hasn’t crashed, I do however have a few .NET updates that have not been installed yet, I’ll continue testing and if there are any more crashes I’ll install the .NET updates and test again.

======== UPDATE =======

Just before posting the above message I decided to compare the Internet Explorer Proxy settings as they are global and used by chrome and the laptop that was working was using port 51919 while the laptop that wasn’t working was using port 3129 which I had manually set a while ago when I had an issue were JMR was not working on any site.

Since removing 127.0.0.1 port: 3129 JMR is now working with Livejasmin and seems to be using random ports for the proxy now, such as 51919, 4002 etc

--- Import ---
Author: Antony Black
Created At: 2018-03-16T22:54:55+08:00
Updated At: 2018-03-16T22:54:55+08:00
Views: 187
Votes: 0
--- Import ---